Upgrade your ride with the Bafang BBS01/BBS02/BBSHD Mid Drive Motor Kit - Watch us install it

🏳️‍🌈Our webside:https://varstrom.com/?ref=dwcwdedm 🏳️‍🌈The installation video of the BAFANG BBS mid motor is a comprehensive guide that will walk you through the steps of installing the BAFANG BBS mid motor on your bike. 🏳️‍🌈The video is designed to help you install the motor with ease and to ensure that you have a safe and functional system. 🏳️‍🌈This is the first time I've made a video on my own, so if you have any questions, suggestions for improvement, technical exchanges and feedback, please feel free to contact me in the comments section and I'll get back to you one by one :) 🏳️‍🌈If you need to buy BAFANG or Varstrom products, please follow our website:https://varstrom.com/?ref=dwcwdedm, We will provide personalised discounts "vanko" so that you can get 30€ discount. **Installation of Bafang BBS01/BBS02/BBSHD Mid-Drive Motor Kit** 0:00 - Disassemble crank and bottom bracket. 0:06 - Use an M8 Allen wrench to disassemble the crank. 0:46 - Disassemble the crank on the other side in the same way. 1:09 - Use a bottom bracket removal tool to remove the bottom bracket. 1:45 - Install the sprocket on the motor with five screws. 2:18 - Install the sprocket guard with five screws. 3:09 - Install the motor and crank. 3:09 - Install the bracket of the motor tripod. 4:04 - Install the crank with an M8 Allen wrench. 4:39 - Install the pedals on both sides with a wrench. 5:18 - Install the chain and test the bicycle transmission system. 5:37 - Install the battery plate with the battery key. 7:16 - Install the battery and connect the cables. 7:16 - Install the battery, connect the cables and pay attention to the positive and negative poles. 8:08 - Install the speed sensor base and fix it. 8:48 - Install the speed sensor on the base. 9:44 - Install the magnet on the wheel spoke and fix it. 10:02 - Connect the speed sensor cable and tighten the nut. 10:30 - Install the speed sensor and handlebar components. 10:30 - Install the bicycle handlebar components. 11:48 - Connect the thumb throttle and ont4 cable. 13:10 - Connect the display cable and ont4 cable. 13:17 - Install the brake sensor as an example. 13:27 - Install the speed sensor magnet. 13:46 - Install the brake sensor and headlight and test. 13:47 - Install the brake sensor in the same way. 14:20 - Install the headlight with screws. 14:53 - Connect the headlight and motor cables. 15:10 - Press and hold the plus key on the controller to turn on the light. 15:22 - Test whether the motor works normally.