Tool Offsets with Tool Setter Probe in UGS Macro

Something that has been plaguing me for a while, is manually zero'ing Z height between tools between each operation. 1 part could require up to 10 tool changes. Working with and without a vice, and varying stock heights, this eats up allot of time, otherwise spent making chips! With the help of a bunch of awesome people, I was able to create a macro which speeds up my workflow. Huge thanks to; ThorbenH (Github): https://github.com/winder/Universal-G-Code-Sender/issues/1317 Joerg @JBWorx Myles @NEWTechCreative Pete @RootCNC The Macro uses the G59 Coordinate system to temporarily store a Z offset. If you use G59 for something else, this can easily be changed to any other free WCS by editing the macro. Please note, you will have to zero out your G59 (or other WCS) to the position of your tool setter, and it's a good idea to do this in XY, and Zero Z at the top of your machines travel. Macro: G92.1; G90; G53 G0 Z0; G59; G0 X0 Y0; G0 Z0; G91; G38.2 Z-90 F300; G0 Z2; G38.2 Z-10 F30; G4 P.25; G38.4 Z10 F20; G4 P.25; G38.2 Z-10 F10; G4 P.25; G38.4 Z10 F5; G4 P.25; G92 Z0; G0 Z5 F3000; G90; G53 G0 Z0 F3000; G54; Support our work at PixelCNC over on instagram! www.instagram.com/pixelCNC 00:00 Intro to Tool Setter Program 00:53 Streamdeck for Machine control 01:13 Disclaimer 01:30 Load first tool 02:28 Probe first tool 02:56 Move to G54 Zero 03:38 Change to next tool 03:59 Probe new tool 04:23 Checking Z Offset 04:51 Change to next tool 05:03 Probe new tool 05:16 Checking new Z Offset 05:27 The Macro 05:40 Special thanks!