Rebuilding My Aventon Mataro Fixed Wheeled Bicycle From Scratch

Immerse yourself into this satisfying video showing you step by step on how I rebuilt my Aventon Mataro Fixie. These are the steps I followed: • Disassembly of parts • Apply paint remover + remove old paint • Sand and smooth down the parts that will be sprayed using various levels of sand paper. (Preparation is the most important and key stage when it comes to spraying) • Sanitise and clean the parts before laying primer • Lay 3 coats of primer (allow 20 mins between each coat in a well ventilated area, allow 24 hours to dry after last coat before laying paint) • Flatten primer by using a really fine grit sand paper to smoothen out the primer to allow for best chance of laying good paint • Lay 3 coats of British Green Racing paint (allow 20 mins between each coat in a well ventilated area, allow 24 hours to dry after last coat before laying clear coat, lacquer). This colour was chosen as a tribute to my car. • Lay 3 coats of clear coat, lacquer (allow 20 mins between each coat in a well ventilated area, allow 7 days for paint to harden) • Assembly of bike with new parts (miche postcard air crankset kit) • Stickers application Social Media Instagram - ishmatic_official Facebook - Ish Edoo Thank you for watching!