Pairing GodoxV1 with Godox XPro Trigger

The basic process to pair your Godox V1 speedlight with your Godox XPro trigger: 1. Put the V1 speedlight in Rx mode. Using the backwards Z button until the screen turns orange. It will say Rx on the screen. Unless you have an older firmware update, in which case it will say slave. 2. Set up the channels. Use the menu button to scroll through to scan, and start. This will let give you a list of channels that should be free from interference. Once you have this, set the V1 speedlight to one of these channels. Then set the XPro trigger to the same channel. 3. Set ID. ID can be left off, but if you do use it the trigger and the speedlight need to be set to the same ID. Can be found in both the trigger and the speedlight by pressing menu and scrolling to ID. 4. Set up groups. Set which group you would like your speedlight to be in by pressing "GR" and cycling through the letters. Adjust the settings of that group on your Xpro trigger. If you're only using one speedlight, there isn't any advantage/disadvantage to choosing different groups. I generally leave mine in Group A. 0:00 Intro 0:12 Step 1 0:31 Step 2 2:38 Step 3 3:55 Step 4 You can buy the the V1 (for Canon) here: https://amzn.to/2Vv5Hcr XPro (for Canon) https://amzn.to/33EaVHe While I appreciate it if you use the affiliate link I would suggest shopping around to ensure you get the best price/ **Disclaimer: Impossible Creative is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com