Making an EASY Braided Cuff Bracelet

I have made a LIGHT braided cuff bracelet in my workshop. I had some old electrical wiring that I stripped so I had the pure copper wires. I used 5 wires - 1 of 60cm and 4 of 80cm - and started braiding it together. After the braiding, I hammered the cuff bracelet into shape and straightened it - because it was twisted. In my workshop I also had a piece of old copper pipe that I scratched grooves into and cut off - 1 for each end of the bracelet. After I soldered 2 small copper plates on the ends and soldered the ends to the bracelet, I put it in sulfuric acid (24%) to remove the impurities from the soldering. In the meantime, I found an old piece of copper plate from which I sawed a pendant, shaped like a razor blade. I sanded and polished it and afterwards I had a nice necklace made from recycled copper. Now the bracelet was cleaned in the sulfuric acid and I could polish and polish this as well at the end. I was very pleased with the result - both a necklace and a bracelet - all made from recycled copper from my workshop. #makingbracelets #mensjewelry #makingjewellery #braceletcuff Chapters: 0:00 Resume 0:46 Stripping of copper wires 3:08 Braiding and shaping of the copper cuff bracelet 4:52 Make the ends of bracelets from recycled copper pipes 5:00 Solder ends on bracelets 5:13 Make necklaces from old copper plate 6:53 Presentation of the finished copper cuff bracelet Subscribe for more My Projects - videos: https://www.youtube.com/channel/UCa6u8pIYPovyaV2LNZ9_RVg?sub_confirmation=1 If you want to be se how I made a Silver and copper bracelet Cuff, you might want to watch this video: Cool CUFF Bracelet Making - NO Solder - In My Workshop: https://youtu.be/o82WVVEXpNc This video is made for entertainment purposes. Thank you for watching and your support. Best, Bjorn