Is Raw PET the Next Step After PETG? eSun Filament Reviewed

In this video, I review eSun PET filament—a material that offers good mechanical strength and dimensional stability, but can be more difficult to print than PETG. So far I’ve tested many PETG and PET-CF filaments, and I was curious what we can expect from raw PET filament without any additives or fiber reinforcement. Product page (affiliate): https://shrsl.com/4w7ep I go through everything from the basic specs and unboxing to print settings, temperature tests, and real-world object trials. As always, I run a full series of mechanical tests including tensile, layer adhesion, shear, twist, impact, bending, creep, and temperature resistance. You’ll also see how the filament behaves during annealing, whether it prints well without an enclosure, and how much it shrinks after printing. Plus, I test a printed bottle to check for watertightness and functional performance. If you enjoy this type of content, consider subscribing and giving the video a like—it helps the channel grow! If you’d like to support my work and get early access to some videos, along with a summary spreadsheet of all my test results, check out my Patreon. https://www.patreon.com/mytechfun Bottle STL: https://www.printables.com/model/69855-dragon-cola-dice-bottle-mythic-potions Chapters: 0:00 Introduction 0:49 Specifications 1:51 Unboxing 2:32 Temperature tower 3:05 Slicer settings 3:19 3D printing 3:50 Annealing 4:48 No enclosure printing 5:33 Bottle 6:34 Shrinking 7:10 Tensile test 7:26 Layer adhesion test 8:32 Shear test 8:46 Twist test 9:30 Impact test 9:53 Bending test 10:29 Creep test 11:27 Temperature test 11:54 All results 12:15 Conclusions #3dprinting #esun #petfilament