How to Laminate Large Composite (Fibreglass) Moulds

►Full Project Guide: https://www.easycomposites.co.uk/learning/large-composites-moulds-using-uni-mould Further information and links ▼ Second video in a four-part series following a project to make lightweight, super tough sledges for a polar world-record attempt. Introduction to the project here: https://youtu.be/li7ug4-k4mk In this tutorial we demonstrate the correct method for laminating larger composite moulds using our Uni-Mould rapid tooling system. The method shown allows a single laminator to lay-up a mould of almost any size. The tutorial covers suitable pattern materials and coatings, release agent application, gelcoat application, coupling/tie-coat application and the main layup. Products featured in this tutorial: ►Complete Uni-Mould Kits https://www.easycomposites.co.uk/uni-mould-complete-mould-making-kit ►Uni-Mould Tooling Resin https://www.easycomposites.co.uk/uni-mould-polyester-tooling-resin ►Uni-Mould Tooling Gelcoat https://www.easycomposites.co.uk/uni-mould-vinylester-tooling-gelcoat ►Uni-Mould Coupling Coat https://www.easycomposites.co.uk/uni-mould-vinylester-coupling-coat ►Emulsion Bound CSM https://www.easycomposites.co.uk/450g-emulsion-bound-chopped-strand-mat ►Easy-Lease Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent ►Lint Free Wipes https://www.easycomposites.co.uk/lint-free-solvent-application-wipe-cloth ►Filleting and Filling Wax https://www.easycomposites.co.uk/soft-yellow-filleting-filling-wax ►Filleting Tools https://www.easycomposites.co.uk/Ball-End-Filleting-Tools-Set-of-3 ►Laminating Brushes https://www.easycomposites.co.uk/composites-laminating-brush ►Plastic Finned Roller https://www.easycomposites.co.uk/plastic-finned-laminating-roller ►Plastic Demoulding Wedge https://www.easycomposites.co.uk/plastic-demoulding-wedge ►Blue Polishing Pad https://www.easycomposites.co.uk/medium-soft-blue-polishing-pad ►NW1 Cutting Compound https://www.easycomposites.co.uk/nw1-white-super-cutting-compound