Drill press fixture plate v2

As mentioned in a previous video where I made the wooden fixture plate, I had some ideas for the next version. Well this is that next version of my vice fixture plate that I can use either in my bench vice or the drill press cross slide vice. One thing I forgot to mention in the video, was that with all the holes tapped, I could put smaller blocks on as well to help keep the project in place from moving sideways along with the top bars. I believe this is made out of 6061 aluminum off cuts that I got at my local metal supplier. The long bolts for the cross members are 5/16" and all of the 60 tapped holes are tapped for that size. I left the alternating spots on the plate where I did not drill holes for future hold down requirements, ie 3/8 or even 1/4 bolts.