DIY NAS build on a budget! (Raspberry Pi 5, Radxa Penta HAT, OpenMediaVault)

Quick video about my new NAS using the surprisingly expensive Raspberry Pi 5 and the Radxa Penta hat. I'm on a budget so the lifespan of the hdd don't matter and since I'm not keeping any important data there I'm using second hand HHDs. If you are going to make any kind of NAS for your precious memories or important data please get new HDDs or SSDs. Since this video I've also made an enclosure for it that I might upload sometime in the future. Commands used: Enabling PCIe sudo nano /boot/firmware/config.txt Append at the end these lines dtparam=pciex1 dtparam=pciex1_gen=3 HDD speed test sudo dd if=/dev/zero of=/dev/sda bs=32M status=progress count=100 oflag=direct Updating the Raspberry Pi sudo apt update sudo apt upgrade Installing OpenMediaVault wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/preinstall | sudo bash wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash (in my case wget -O didn't work so I replaced it with curl -sSL) Some non affiliate links for the hardware: https://www.raspberrypi.com/products/raspberry-pi-5/ https://radxa.com/products/accessories/penta-sata-hat/ 00:00 Intro 00:31 Hardware 18:35 Software