DBX 560A - Classic DBX 160 style compression in a modern 500 series form factor. Don't be fooled by the price...
This review includes:
- Audio tests with Drums, Bass, Acoustic Guitar, Vocals, and Voiceover
- Self noise test with spectrum analysis
- Build Quality
This is not a sponsored video.
DBX 560A Features and Specifications:
Form Factor: 500 Series / 13.34x3.81x15.24cm (5.25x1.5x6”) / 590g (1.3ibs)
Maximum Input Level: +22dBu
Input Impedance: Balanced: 40kohm / Unbalanced: 20kohm (Electronically Balanced / Unbalanced) / RF Filtered
Maximum Output Level: +22dBu
Output Impedance: Balanced: 30ohm / Unbalanced: 15ohm (Electronically Balanced / Unbalanced) / RF Filtered
Frequency Response: 20-20000Hz +0db/-0.5dB / 0.5-100000Hz +0dB/-3dB (at unity gain)
THD+N: less than 0.005% typical 20-20000Hz @ 1kHz input/0dBu (no compression) / less than0.07% typical up to 40dB @ 1kHz (all compression amounts)
CMMR: greater than40dB; typical greater than 55dB @ 15ohm
Equivalent Noise: less than -97dBu Unweighted (22-22000Hz) (at unity gain)
Dynamic Range:: greater than119dB
Power Supply: 16VDC / 60mA per power rail / 1.92w
⚙️ Used in this Video:
DBX 560A: https://amzn.to/3Lz9v6W
🎼 Music:
Right Now (Call on Me) by Thyra
Soaring by Brendon Moeller
============================================================
To Support this Channel:
❤️ Likes, Comments, and Subs is always appreciated!👆👆👆
❤️ If you found this video helpful, think about leaving a Super Thanks! 👆👆👆
👉All gear used on askdrtk has been purchased by me unless I tell you otherwise in the video or description. Your support helps make more tutorials and gear reviews like this one possible. Thanks! Todd
============================================================
🔥Related Videos:
500 Series Chassis Guide:
https://youtu.be/AOdrAXXLdmI
Analog Outboard Guide - Start Here:
https://youtu.be/JuoOsxg142s
🎞 Timestamps:
00:00 Introduction
00:42 Controls and OverEasy mode
01:50 Audio Tests - Drums
03:14 Audio Tests - Bass
04:25 Audio Tests - Acoustic Guitar
06:02 Audio Tests - Vocals
07:19 Audio Tests - Self Noise
08:08 Build Quality
08:36 Highlighted Features and Specifications
09:08 Final Thoughts and Recommendations
============================================================
🔥 Setting Up Your Studio? Do This First:
To get the most out of your recording or streaming space, I recommend sound treatment including acoustic absorption panels. This is the single biggest way to improve your audio before investing in other gear. You can make your own, or I highly recommend GIK Acoustics as they manufacture some of the best quality acoustic treatment available at an excellent value.
Check out GIK Acoustics here: https://www.gikacoustics.com/ref/131/ 👈👈👈
Get the best sound in your studio space and support askdrtk tutorials and reviews!
===========================================================
🔥Need Help?
Building or upgrading a studio for music, voice acting, podcasting, or content creation? Need help choosing the right audio or video gear? Using the gear you have? Book a one-on-one Zoom appointment with Todd to get the answers you need while saving time and money. Visit the askdrtk website for more information: https://askdrtk.com/coaching/ 👈👈👈
===========================================================
All gear featured in askdrtk content is supplied by askdrtk and videos are not sponsored unless I tell you in the video or description.
#homestudio #homerecording #audiogear
🛒 Important note about product and service links:
Links included in askdrtk content are affiliate links that may provide a small commission to askdrtk without cost to you or influence of my content or opinions. Thanks for clicking! (askdrtk is a member of amazon associates and other affiliate programs.) Disclaimer: https://askdrtk.com/disclaimer/