Building the GeneriBox - A Customizable Light Box

I'm happy to share my new light box design, the GeneriBox! I've made this with the intention of having easily changeable faces so you don't have to print an entirely new box whenever you want to change it's appearance. I'm approaching this as a 'blind leading the blind' introduction to Fusion 360, as I have no formal training on it and am just sharing things I've learned and how I apply them. In the video I go over considerations for fast and strong printing with appropriately dimensioned walls, fitment of the face to the base, creating retention pegs, setting things up in Bambu Studio, and a quick bit on assembly and showing off the final product. Models, print profiles, and BoM available at Makerworld - https://makerworld.com/en/models/70055#profileId-74376 00:00:00 Getting Set Up 00:01:00 Mixing Units and Using Math for Dimensions 00:02:00 Basic Shape 00:03:00 How thick should walls be? 00:04:20 Re-Using Sketches (Keyholes) 00:06:48 Creating Solids (more math!) 00:10:46 Sketching the Power Alcove 00:13:14 Cutting and Building the Power Alcove 00:18:42 Making the Reflector 00:20:35 Adding a Power Connector 00:32:09 Making the Face 00:36:33 Adding Retention Tabs 00:43:01 Adding Retention Holes 00:44:48 Overview 00:45:35 Exporting and File Types 00:46:45 Making a Face 00:49:23 Importing to Bambu Studio 00:52:53 3MF vs STEP Print Speed 00:56:05 Base Pre-Print Checks 00:59:30 Setting up the Face 01:00:16 About Surface Patterns 01:01:55 Installing SP110E 01:02:50 About LED Strips 01:04:54 Installing LEDs 01:07:21 Powering it Up! 01:08:09 Stills 01:08:30 Swapping Faces