Analysis Design of RC Building as per Eurocode or Ethiopian building code standards in ETABS Part 1

This tutorial video demonstrates the process of modeling a G+3 (ground plus three stories) reinforced concrete building using ETABS software, following Eurocode or Ethiopian building standards. The video covers the following topics in Part 1 of the series: 1. Introduction to the project and review of architectural drawings 2. Discussion of important design data, including: - Building location and seismic zone - Soil type and bearing capacity - Material properties (concrete and steel grades) - Structural element dimensions - Loading information 3. Setting up the ETABS model: - Creating a new model and defining grid systems - Inputting story data and heights - Defining materials (concrete and steel) - Creating and modifying section properties for columns, beams, and slabs - Considering cracked section properties for analysis 4. Modeling the structure: - Drawing columns, beams, and slabs - Modeling cantilever elements - Editing the model to match architectural plans for each floor - Assigning appropriate section properties to structural elements 5. Assigning fixed supports at the base of the structure 6. Reviewing the 3D model and making final adjustments Note that Part 2 will cover topics such as load assignment, load combinations, rigid diaphragm assignment, and slab meshing. here is part 2: https://youtu.be/yvZAM9tHNNQ This tutorial is suitable for structural engineers and students learning to use ETABS for reinforced concrete building design according to Eurocode or Ethiopian standards.